ZyXEL Communications ZYWALL 5 - V4.04 Guía de usuario descargar pdf (Pagina 54)

ZyXEL Confidential

404XD3C0.docx

54/181

Condition:

(1) Enable AV and POP3 all directions.

(2) Send a mail and attach 3 infected files from LAN to WAN.

(3) LAN PC receives the mail from WAN to LAN.

(4) Two files disappear.

(5) SMTP also has the same issue.

41. [BUG FIX] SPR ID: 070510451

Symptom: System reboot without information.

Condition:

(1) Reset to Default ROM file.

(2) Enable ALG H.323.

(3) Edit web eWC/Firewall/Service, add a custom service rule, Service

Name=UDP_100, Port Range=from 100 to 100.

(4) Edit web eWC/Firewall/Rule Summary，Packet Direction=WAN to LAN，edit rule

1，Selected Service(s)=*H.323（TCP：1720）and UDP_100.

(5) Edit web eWC/NAT/Port Forwarding，WAN Interface=WAN1，forward 1720 &

100 ports to 192.168.1.33

(6) Dial OpenPhone from WAN side's PC to LAN side's PC and DUT will reboot

without information.

42. [BUG FIX] SPR ID: 070515759

Symptom: Device crashes after click Apply in eWC>WAN>WAN2.

Condition:

(1) Go to eWC>WAN>WAN2. Configure correct 3G parameters.

(2) Clicks apply and device crashes.

43. [BUG FIX] SPR ID: 070514637

Symptom: Policy Route can’t work via 3G.

Condition:

(1) In A/A mode, Load Balancing Algorithm is Weighted Round-Robin and ratio is

1:1.

(2) Add a policy rule with following configuration.

- Interface: LAN

- Destination: 168.95.1.1~168.95.1.1

- Gateway: WAN Interface: WAN2.

- Log :Yes

(3) PC connected to LAN ping 168.95.1.1. There are policy route logs.

(4) Input “tracert –d 168.95.1.1” on PC and you can find the traffic go out via WAN1.

44.

[BUG FIX] SPR ID: 070511524

Symptom: Got error message when set wireless security to WPA or 802.1x.

Condition:

(1) Edit web＞ AUTH Server＞ RADIUS, enable Authentication server, Server IP

Address=192.168.11.4, Key=1234.

(2) Edit web＞ Wireless Card＞ enable wireless card, ESSID=pqa-1234,

security=WPA, Apply.

(3) GUI shows error message ” The wireless card does not work because RADIUS

server is not active.”

(4) This is incorrect, because radius server had setting already.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 180 181

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications ZYWALL 5 - V4.04 Guía de usuario Pagina 54

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications ZYWALL 5 - V4.04