ZyXEL Communications STB-1003 Manual de instrucciones descargar pdf (Pagina 9)

07.27.11

UNIVERSAL

REMOTE

Programming Instructions

The universal remote control is used with the CISCO 330 and CISCO 430 set top box (STB). A new universal

remote needs to be programmed to both the set top box (STB) and to the TV or other device. This remote can

be programmed for use with more than one device. It can be programmed for the TV, DVD, VCR, or use the

AUX button to program other devices. The quick programming instructions can also be found on the back of

the Universal Remote. The device keys or buttons are located along the top row of the remote. You must be

in front of the STB and the TV or other device when programming the remote.

Programming the remote to the STB box programs the remote to control the channel up/down and other

remote control button functions like guide, menu, last, exit, etc. Programming the remote to the TV will

allow the remote to control the TV power on/off function and the volume up/down.

1. Program the Universal Remote to the STB:

These instructions apply for both the Cisco 330 and Cisco 430 set top boxes.

a. Power on the set top box.

b. Press and hold the STB button and the OK/SEL button until the STB button lights.

c. Press 251 on the number key pad, and then press the STB button to store the code.

2. Quick Programming the Universal Remote to the TV:

a. Turn on the TV you want to program.

b. Press the TV button and the OK/SEL button until the TV button lights.

c. Press the CH+ (Channel up) until TV turns off, then release. (This can take several

d. Press the TV button to store the code.

seconds.

Please keep going it will take awhile. You can press and hold the channel up button and this will go

faster, but you need to pay close attention and release as soon as the TV powers off.)

3. Quick Programming the Universal Remote to other devices:

a. Turn on the device you want to program (DVD, VCR, etc.)

b. Press and hold the device button and the OK/SEL until the device button lights.

c. Press and hold the CH+ (Channel Up) until the device turns off, then release.

d. Press the device button to store code.

4. Manually Programming the Universal Remote using device codes:

a. Using the “TV and Device Brand Codes” find the 3-digit device code or codes for the

appropriate device (TV, VCR, DVD, AUX, etc.) that the remote is being programmed to.

b. Turn on the device you want to program.

c. Press the device button and the OK/SEL button until the device button lights.

d. Using the number key pad enter the 3-digit device code from step number 4 a.

e. If none of the device codes provided in the “TV and Device Brand Codes” work for your

particular device, use the Quick Programming method detailed in step 1 or 2 above.

Note: The system on/off button on the universal remote will power on/off all devices

programmed to the remote.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 38 39

Sin comentarios

ZyXEL Communications STB-1003 Manual de instrucciones Pagina 9