Zyxel-communications 10 Manual de usuario descargar pdf (Pagina 73)

100

101

ZyWALL 10~100 Series Internet Security Gateway

WAN and Dial Backup Setup 5-5

Figure 5-3 Menu 2.1 Advanced WAN Setup

The following table describes fields in this menu.

Table 5-3 Advanced WAN Port Setup: AT Commands Fields

FIELD DESCRIPTION DEFAULT

AT Command

Strings:

Dial Enter the AT Command string to make a call. atdt

Drop Enter the AT Command string to drop a call. “~” represents a one

second wait, e.g., “~~~+++~~ath” can be used if your modem has a

slow response time.

+++ath

Answer Enter the AT Command string to answer a call. ata

Drop DTR When

Hang Up

Press the [SPACE BAR] to choose either Yes or No. When Yes

is selected (the default), the DTR (Data Terminal Ready) signal is

dropped after the “AT Command String: Drop” is sent out.

Yes

AT Response String:

CLID (Calling Line

Identification)

Enter the keyword that precedes the CLID (Calling Line Identification)

in the AT response string. This lets the ZyWALL capture the CLID in

the AT response string that comes from the WAN device. CLID is

required for CLID authentication.

NMBR =

Menu 2.1 - Advanced WAN Setup

AT Command Strings: Call Control:

Dial= atdt Dial Timeout(sec)= 60

Drop= ~~+++~~ath Retry Count= 0

Answer= ata Retry Interval(sec)= N/A

Drop Timeout(sec)= 20

Drop DTR When Hang Up= Yes Call Back Delay(sec)= 15

AT Response Strings:

CLID= NMBR =

Called Id=

Speed= CONNECT

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 494 495

Comentarios a estos manuales

Sin comentarios

Zyxel-communications 10 Manual de usuario Pagina 73

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications 10