Zyxel-communications 202H Manual de usuario descargar pdf (Pagina 90)

Prestige 202H User’s Guide

9-2 Remote Node TCP/IP Configuration

To configure an IP static route, use Menu 12 – IP Static Route Setup, as displayed next.

Figure 9-2 Menu 12 IP Static Route Setup

From Menu 12, select one of the available IP static routes to open Menu 12.1 – Edit IP Static Route, as

shown next.

Figure 9-3 Menu 12.1 Edit IP Static Route

Table 9-1 Menu 12.1 Edit IP Static Route

FIELD DESCRIPTION

Route Name Enter a descriptive name for this route. This is for identification purposes only.

Active This field allows you to activate/deactivate this static route.

Destination IP

Address

This parameter specifies the IP network address of the final destination. Routing is

always based on network number. If you need to specify a route to a single host, use a

subnet mask of 255.255.255.255 in the subnet mask field to force the network number

to be identical to the host ID.

Menu 12 - IP Static Route Setup

1. ________

2. ________

3. ________

4. ________

5. ________

6. ________

7. ________

8. ________

Enter selection number:

Menu 12.1 - Edit IP Static Route

Route #: 1

Route Name= RouteName

Active= No

Destination IP Address= ?

IP Subnet Mask= ?

Gateway IP Address= ?

Metric= 2

Private= No

Press ENTER to Confirm or ESC to Cancel:

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 308 309

Sin comentarios

Zyxel-communications 202H Manual de usuario Pagina 90