Zyxel-communications 480 Manual de usuario descargar pdf (Pagina 54)

Prestige 480 ISDN Router

3-8 Internet Access

Table 3-4 Internet Access Setup Menu Fields

Field Description

ISP’s Name Enter the name of your Internet Service Provider, e.g., myISP. This

information is for identification purposes only.

Pri Phone and Sec Phone

Number

Both the Primary and the Secondary Phone number refer to the number

that the Prestige dials to connect to the ISP.

My Login Name Enter the login name given to you by your ISP.

My Password Enter the password associated with the login name above.

Single User Account Please see the following section for a more detailed discussion on the

Single User Account feature. The default is Yes.

IP Address If your ISP did not assign you a static IP address, enter [0.0.0.0] here;

otherwise, enter that IP address here.

Telco options Transfer

Type

This field specifies the type of connection between the Prestige and this

remote node. Select 64K, or Leased.

Multilink The Prestige uses the PPP Multilane Protocol to bundle multiple links in

a single connection to boost the effective throughput between two nodes.

This option is only available if the transfer type is 64K. See Menu 11.2

for more details.

Idle Timeout This value specifies the number of idle seconds that elapses before the

remote node is automatically disconnected. Idle seconds is the period of

time when no data is transmitted from your Prestige. Administrative

packets such as RIP are not counted as data. The default is 100

seconds. This option only applies when the Prestige initiates the call.

At this point, the SMT will ask if you wish to test the Internet connection. If you select Yes, your

Prestige will call the ISP to test the Internet connection. If the test fails, note the error message that

you receive on the screen and take the appropriate troubleshooting steps.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 155 156

Sin comentarios

Zyxel-communications 480 Manual de usuario Pagina 54