Zyxel-communications 802.11g Wireless Access Point ZyXEL G-560 Manual de usuario descargar pdf (Pagina 59)

ZyXEL G-560 User’s Guide

Chapter 6 Wireless Screens 59

Figure 31 Wireless Settings: Access Point

The following table describes the labels in this screen.

Table 10 Wireless Settings: Access Point

Operation Mode Select the operation mode from the drop-down list. The options are Access Point

and Access Point + Bridge.

SSID Wireless stations associating to the access point (AP) must have the same SSID.

Enter a descriptive name (up to 32 printable characters) for the wireless LAN.

Spaces are allowed.

Note: If you are configuring the G-560 from a computer connected

to the wireless LAN and you change the G-560's SSID,

channel or security settings, you will lose your wireless

connection when you press Apply to confirm. You must then

change the wireless settings of your computer to match the

G-560's new settings.

Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station

cannot obtain the SSID through passive scanning using a site survey tool.

Channel Set the operating frequency/channel depending on your particular region.

Select a channel from the drop-down list box.

Refer to the chapter on wizard setup for more information about channels.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 143 144

Sin comentarios

Zyxel-communications 802.11g Wireless Access Point ZyXEL G-560 Manual de usuario Pagina 59