Zyxel-communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNL Manual de usuario descargar pdf (Pagina 432)

P-2602HWNLI User’s Guide

432 Appendix I Commands

WAN Call Schedules

Call scheduling (applicable for PPPoA or PPPoE encapsulation only) allows you to dictate

when a remote node should be called and for how long.

actnomatch [type 0-2

= checknext | forward

| drop]

Set the action for packets that do not match the filter rule.

offset [#] Set offset for the generic rule. Type the starting byte of the

data portion in the packet that you want to compare. The range

for this field is from 0 to 255.

length [#] Set the length for generic rule. Type the byte count of the data

portion in the packet that you want to compare. The range for

this field is 0 to 8.

mask [#] Set the mask for generic rule. Type the mask (in Hexadecimal)

to apply to the data portion before comparison.

value [(depend on

length in hex)]

Set the value for generic rule. Type the value (in Hexadecimal)

to compare with the data portion.

clear Clear the current filter set.

save Save the filter set parameters.

display [set#][rule#] Display filter set information. W/o any parameters, this

displays buffer information.

freememory Discard changes.

lan filter

[incoming|outgoing]

[tcpip|generic] [set#1]

[set#2] [set#3] [set#4]

Set LAN filter to be incoming/outgoing or protocol /device and

the filter set could be 1-12, 0 means empty. Example: Lan filter

incoming tcpip 1 0 0 0

wan node filter

[incoming|outgoing]

[tcpip|generic] [set #1]

[set #2] [set #3] [set

#4]

Set WAN filter, incoming or outgoing can be specified, and

filter set can be 1-12, value 0 means empty.

Table 189 Filter Commands

COMMAND DESCRIPTION

Table 190 WAN Call Schedules

COMMAND DESCRIPTION

wan callsch index [set#] Set the call schedule index #. You must apply this command

first before you begin to configure a call schedule.

name [set name] Set the schedule name.

active [Yes | No] Enable/Disable the schedule.

startday [year]

[month] [day]

Set the schedule start day.

onceday [year]

[month] [day]

Set the schedule to be used one time.

weeklyday Sunday

[1:active|0:inactive]

Set the schedule to recur weekly on Sundays.

1 2 ... 427 428 429 430 431 432 433 434 435 436 437 ... 441 442

Comentarios a estos manuales

Sin comentarios

Zyxel-communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNL Manual de usuario Pagina 432

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNL