Zyxel-communications NWD-270N Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 98
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Chapter 1 Getting Started
NWD-270N User’s Guide
11
1.3 Hardware Installation
This sections shows you how to install your NWD-270N.
1 Locate an available USB port on the computer.
2 Remove the protective cap to expose the USB connector. Insert the NWD-270N into an
available USB port on the computer.
The NWD-270N’s LED (light) turns on if it is properly inserted.
" Never bend, twist or force the NWD-270N into the port. If there is not enough
space to attach the NWD-270N, use the included USB cable.
1.4 Software Installation
This section shows you how to install the Mac OS X version of the ZyXEL Utility. For
detailed information on using it, see Chapter 3 on page 29.
1.4.1 Minimum System Requirements
In order to install the ZyXEL Utility for Mac OS X, your computer must meet the following
minimum system requirements:
20 MB of free hard drive space
128 MB RAM
Mac OS X 10.3 and higher
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 97 98

Comentarios a estos manuales

Sin comentarios