Zyxel-communications PLA-470 Manual de usuario descargar pdf (Pagina 63)

Chapter 6 Powerline Network Setup Tutorial

PLA-4xx Series User’s Guide

Figure 45 Adapters on a New Powerline Network

• If you want to access any of your new powerline networks using the PLA-4xx Series

Configuration Utility, change the Network Name on your local adapter to the network

name for the network you want to access. The adapters on that network will then display

in the adapter table, allowing you to select and configure each one.

6.2 Troubleshooting

The HomePlug ( ) LED (light) should light up on your adapter when it successfully

connects to other adapters on your network. If it does not, try the following measures.

• Make sure the adapter is plugged in to a power socket and the power socket is turned on.

• Check you have entered the correct network name for your network.

• Check your powerline adapter is connected to the same electrical circuit as other

powerline adapters on your network.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 91 92

Sin comentarios

Zyxel-communications PLA-470 Manual de usuario Pagina 63