Zyxel-communications ADSL2+ Ethernet Gateway P-660R-T Series Manual de usuario descargar pdf (Pagina 208)

P-660R-T Series User’s Guide

Chapter 25 Firmware and Configuration File Maintenance 208

Figure 140 Telnet in Menu 24.5

Menu 24.5 - System Maintenance - Backup Configuration

To transfer the configuration file to your workstation, follow the procedure

below:

1. Launch the FTP client on your workstation.

2. Type "open" and the IP address of your Prestige. Then type "root" and SMT

password as requested.

3. Locate the 'rom-0' file.

4. Type 'get rom-0' to back up the current Prestige configuration to

your workstation.

For details on FTP commands, please consult the documentation of your FTP

client program. For details on backup using TFTP (note that you must remain

in this menu to back up using TFTP), please see your Prestige manual.

Press ENTER to Exit:

25.2.2 Using the FTP Command from the Command Line

1 Launch the FTP client on your computer.

2 Enter “open”, followed by a space and the IP address of your Prestige.

3 Press [ENTER] when prompted for a username.

4 Enter your password as requested (the default is “1234”).

5 Enter “bin” to set transfer mode to binary.

6 Use “get” to transfer files from the Prestige to the computer, for example, “get rom-0

config.rom

” transfers the configuration file on the Prestige to your computer and

renames it “

config.rom”. See earlier in this chapter for more information on filename

conventions.

7 Enter “quit” to exit the ftp prompt.

25.2.3 Example of FTP Commands from the Command Line

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 301 302

Sin comentarios

Zyxel-communications ADSL2+ Ethernet Gateway P-660R-T Series Manual de usuario Pagina 208