Zyxel-communications Centralized Network Management Vantage CNM Manual de usuario Pagina 88

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 430
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 87
Chapter 5 Device Network Settings
Vantage CNM User’s Guide
88
5.3.4.1.2 Response Strings
The response strings tell the device the tags, or labels, immediately preceding the various call
parameters sent from the WAN device. The response strings have not been standardized;
please consult the documentation of your WAN device to find the correct tags.
Click the Advanced button in the Advanced Modem Setup in the Dial Backup screen to
display the Dial Backup Advanced screen shown next.
" Consult the manual of your WAN device connected to your dial backup port for
specific AT commands.
Figure 41 Device Operation > Device Configuration > Network > WAN > Dial Backup >
Advanced (ZyNOS ZyWALL)
The following table describes the labels in this screen.
Table 25 Device Operation > Device Configuration > Network > WAN > Dial Backup >
Advanced (ZyNOS ZyWALL)
LABEL DESCRIPTION EXAMPLE
AT Command
Strings
Dial Type the AT Command string to make a call. atdt
Drop Type the AT Command string to drop a call. "~" represents a one
second wait, for example, "~~~+++~~ath" can be used if your
modem has a slow response time.
~~+++~~ath
Answer Type the AT Command string to answer a call. ata
Vista de pagina 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 429 430

Comentarios a estos manuales

Sin comentarios