Zyxel-communications Internet Security Gateway ZyWALL 100 Manual de usuario descargar pdf (Pagina 98)

ZyWALL 100 Internet Security Gateway

Remote Node Setup 9-15

Table 9-6 Menu 11.1 — Remote Node Profile (Traffic Redirect Field)

FIELD DESCRIPTION EXAMPLE

Edit Traffic

Redirect

Press [SPACE BAR] to select Yes or No.

Select No (default) if you do not want to configure this feature.

Select Yes and press [ENTER] to configure Menu 11.6 — Traffic

Redirect Setup.

Yes

Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press

[ESC] at any time to cancel.

9.5.1 Traffic Redirect Setup

Configure parameters that determine when the ZyWALL will forward WAN traffic to the backup gateway

using Menu 11.6 — Traffic Redirect Setup.

Figure 9-12 Menu 11.6 — Traffic Redirect Setup

Table 9-7 Traffic Redirect Setup

FIELD DESCRIPTION EXAMPLE

Active

Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic

redirect setup. The default is No.

When the Active field is Yes, you must configure every field in this screen

unless you are using PPPoE or PPTP encapsulation (except Check WAN

IP Address and Timeout).

If you don’t configure these fields and are using PPTP or PPPoE

encapsulation, then the ZyWALL checks the PPPoE channel or PPTP

tunnel to determine if the WAN connection is down.

Yes

Menu 11.6 - Traffic Redirect Setup

Active= Yes

Configuration:

Backup Gateway IP Address= 0.0.0.0

Metric= 15

Check WAN IP Address= 0.0.0.0

Fail Tolerance= 5

Period (sec):

Timeout (sec)= 10

Press ENTER to Confirm or ESC to Cancel:

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 355 356

Sin comentarios

Zyxel-communications Internet Security Gateway ZyWALL 100 Manual de usuario Pagina 98