Zyxel-communications NBG334SH Manual de usuario descargar pdf (Pagina 150)

Chapter 15 Remote Management Screens

ZyXEL NBG-334SH User’s Guide

150

15.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:

1 You have disabled that service in one of the remote management screens.

2 The IP address in the Secured Client IP Address field does not match the client IP

address. If it does not match, the ZyXEL Device will disconnect the session

immediately.

3 There is already another remote management session with an equal or higher priority

running. You may only have one remote management session running at one time.

4 There is a firewall rule that blocks it.

15.1.2 Remote Management and NAT

When NAT is enabled:

• Use the ZyXEL Device’s WAN IP address when configuring from the WAN.

• Use the ZyXEL Device’s LAN IP address when configuring from the LAN.

15.1.3 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).

The ZyXEL Device automatically logs you out if the management session remains idle for

longer than this timeout period. The management session does not time out when a statistics

screen is polling. You can change the timeout period in the System screen

15.2 WWW Screen

To change your ZyXEL Device’s World Wide Web settings, click Management > Remote

MGMT to display the WWW screen.

Figure 83 WWW Remote Management

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 289 290

Sin comentarios

Zyxel-communications NBG334SH Manual de usuario Pagina 150