Zyxel-communications NBG334W Manual de usuario descargar pdf (Pagina 229)

NBG334W User’s Guide

229

APPENDIX A

Product Specifications and Wall-

Mounting Instructions

The following tables summarize the NBG334W’s hardware and firmware features.

Table 100 Hardware Features

Dimensions (W x D x H) 162 x 115 x 33 mm

Weight 237g

Power Specification Input: 120~240 AC, 50~60 Hz

Output: 12 V AC 1 A

Ethernet ports Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex

mode.

Auto-crossover: Use either crossover or straight-through Ethernet cables.

4-5 Port Switch A combination of switch and router makes your NBG334W a cost-effective

and viable network solution. You can add up to four computers to the

NBG334W without the cost of a hub when connecting to the Internet

through the WAN port. You can add up to five computers to the NBG334W

when you connect to the Internet in AP mode. Add more than four

computers to your LAN by using a hub.

LEDs PWR, LAN1-4, WAN, WLAN, WPS

Reset Button The reset button is built into the rear panel. Use this button to restore the

NBG334W to its factory default settings. Press for 1 second to restart the

device. Press for 5 seconds to restore to factory default settings.

Antenna The NBG334W is equipped with a 2dBi detachable antenna to provide clear

radio transmission and reception on the wireless network.

Operation Environment Temperature: 0º C ~ 40º C

Humidity: 20% ~ 85% RH (Non-condensing)

Storage Environment Temperature: -20º C ~ 60º C

Humidity: 20% ~ 90% RH (Non-condensing)

Distance between the

centers of the holes on

the device’s back.

125 mm

Screw size for wall-

mounting

M3*10

Table 101 Firmware Features

FEATURE DESCRIPTION

Default IP Address 192.168.1.1

Default Subnet Mask 255.255.255.0 (24 bits)

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 295 296

Sin comentarios

Zyxel-communications NBG334W Manual de usuario Pagina 229