Zyxel-communications Network Storage Appliance NSA-220 Manual de usuario descargar pdf (Pagina 5)

ENGLISH

2 Connect the NSA-220

1 Use the included gray (Ethernet) cable to connect the

LAN port on the rear of the NSA-220 to a computer,

switch, or router on your network.

2 Connect one end of the power cord to the POWER

socket on the rear of the NSA-220 and the other end to the

external power supply. Connect the external power supply to

a power outlet.

1 Use ONLY the included power supply.

3 Press the power button on the front of the NSA-

220 to turn it on. Look at the front panel lights.

V If no lights turn on, make sure the power

cord is not loose and that the power

source is turned on.

• The power button light turns steady blue.

• The SYS light turns steady green after a suc-

cessful startup (it takes about 50 seconds).

• The HDD lights come on if the NSA-220 detects

hard drives in the disk bays.

• The rear panel LAN port has a light that turns on

if the Ethernet port is properly connected to

your network. It blinks while sending or receiv-

ing traffic.

" To turn off the NSA-220, press the power button in once only.

1 2 3 4 5 6 7 8 9 10 ... 130 131

Sin comentarios

Zyxel-communications Network Storage Appliance NSA-220 Manual de usuario Pagina 5