Zyxel-communications P-2302R-P1 Series Manual de usuario descargar pdf (Pagina 3)

P-2302R-P1 Series Quick Start Guide

2 Hardware Connections

1LINE (P-2302RL-P1 only): Use a telephone cable to connect the telephone jack to this port.

2 PHONE 1-2: Use a telephone cable (and any telephone adaptors provided with your P-2302R-P1) to

connect your telephones to these ports. If you only have one telephone, you should only use one port.

3ETHERNET: Use an Ethernet cable to connect your computer to this port.

4WAN: Use an Ethernet cable to connect your broadband modem or router to this port.

5POWER: Use the power adaptor provided with your P-2302R-P1 to connect an appropriate power source

to this port.

On the front panel, the POWER light flashes green while your P-2302R-P1 starts up and stays green once it is

ready. The WAN and ETHERNET lights turn on if the WAN and ETHERNET ports are properly connected.

These lights flash when the P-2302R-P1 is sending or receiving data.

1 2 3 4 5 6 7 8 ... 13 14

Sin comentarios

Zyxel-communications P-2302R-P1 Series Manual de usuario Pagina 3