Zyxel-communications P-660HW-D Series Manual de usuario Pagina 114

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 339
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 113
P-660HW-D Series User’s Guide
113 Chapter 7 Wireless LAN
7.4.3 WPA-PSK/WPA2-PSK
In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless
LAN to display the General screen. Select WPA-PSK or WPA2-PSK from the Security
Mode list.
Figure 59 Wireless: WPA-PSK/WPA2-PSK
WEP Key The WEP keys are used to encrypt data. Both the ZyXEL device and the wireless
clients must use the same WEP key for data transmission.
If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII
string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or
256-bit WEP key respectively.
Apply Click Apply to save your changes back to the ZyXEL device.
Cancel Click Cancel to reload the previous configuration for this screen.
Advanced
Setup
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
Table 34 Wireless: Static WEP Encryption
LABEL DESCRIPTION
Vista de pagina 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 338 339

Comentarios a estos manuales

Sin comentarios