Zyxel-communications P-660RU-T V2 Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
Chapter 2 Introducing the Web Configurator
P-660RU-T v2 User’s Guide
32
2.4 The Site Map Screen
Figure 5 Web Configurator: Site Map Screen
Click the icon (located in the top right corner of most screens) to view embedded help.
The following table describes the labels in this screen.
Table 3 Web Configurator Screens Summary
LINK SUB-LINK FUNCTION
Wizard Setup Connection
Setup
Use these screens for initial configuration including ISP
parameters for Internet Access and WAN IP / DHCP server
address assignment.
Advanced Setup
Password Use this screen to change your password.
LAN Use this screen to configure LAN DHCP and TCP/IP settings.
WAN WAN Setup Use this screen to change the ZyXEL Device’s WAN remote
node settings.
WAN Backup Use this screen to configure your traffic redirect properties and
WAN backup settings.
NAT SUA Only Use this screen to configure servers behind the ZyXEL Device.
Full Feature Use this screen to configure network address translation
mapping rules.
Security Use this screen to configure Internet security and apply the
predefined filter rules.
Dynamic DNS Use this screen to set up dynamic DNS.
Time and Date Use this screen to change your ZyXEL Device’s time and date.
Remote
Management
Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet/FTP/Web to manage
the ZyXEL Device.
UPnP Use this screen to enable UPnP on the ZyXEL Device.
Maintenance
System Status This screen contains administrative and system-related
information and is read-only.
DHCP Table This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is read-only.
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 167 168

Comentarios a estos manuales

Sin comentarios