Zyxel-communications PLA-4xx Series Manual de usuario descargar pdf (Pagina 40)

Chapter 4 Powerline Network Setup Tutorial

PLA-4xx Series User’s Guide

Figure 22 Adding a New Adapter

3 Select your adapter by selecting Local and type the network name for your existing

network in the Network Name field (C).

Figure 23 Adding an Adapter to an Existing Network

4 Click Save and click OK on the pop-up.

Figure 24 Network Name Pop-up

5 Your new adapter will now have the same Network Name as your existing network and

so has now joined your existing network.

6 Connect the adapter to the device you want to add to the network, for example, your

Internet refrigerator in the kitchen.

7 Plug the adapter’s power cord into a power outlet and, if required, switch the power

outlet on.

8 Repeat this procedure for all additional powerline adapters that you want to add to your

existing or new powerline network.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 69 70

Sin comentarios

Zyxel-communications PLA-4xx Series Manual de usuario Pagina 40