Zyxel-communications PLA450 Series Manual de usuario descargar pdf (Pagina 3)

ENGLISH

1 Initial Hardware Connections

1 Screw the antenna clockwise onto the antenna connector. Make sure it is securely

attached. Point the antenna up (perpendicular to the ground).

2 Use the yellow (Ethernet) cable to connect the PLA450’s LAN port to the Ethernet port

on your computer.

3 Use the included power cord to connect the POWER socket to an appropriate power

source. This is also your powerline connection.

1.1 Look at the LEDs (lights)

• Power ( ): Blinks until the device is ready.

• HomePlug ( ): Turns on when connected to other HomePlug AV device(s).

• LAN ( ): Turns on if the LAN connection to your computer is OK.

• WLAN ( ): Turns on if the wireless LAN feature is on.

1 2 3 4 5 6 7 8 ... 102 103

Sin comentarios

Zyxel-communications PLA450 Series Manual de usuario Pagina 3