Zyxel-communications Prestige 128L Manual de usuario descargar pdf (Pagina 72)

60 Novell IPX Configuration

Figure 7-6 Menu 12.2 - Edit IPX Static Route

1. Server Name - In this field, enter in the name that has been

configured for the server. This name must be the exact name

configured in the NetWare server.

2. Network # - This field contains the internal network number of the

remote server which you wish to access. Do not use 00000000 or

FFFFFFFF for this field.

3. Node # - This field contains the address of the node on which the

server resides. If you are using a Novell IPX implementation, this

value is 000000000001.

4. Socket # - This field contains the socket number on which the

server will receive service requests. The default for this field is hex

0451.

5. Type # - This field identifies the type of service the server provides.

The default for this field is hex 0004.

6. Gateway Node - In this field, enter the number (1-4) of the

Remote Node that is linked to this static route. That is, the Remote

Node that you wish to route the packet to.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 113 114

Sin comentarios

Zyxel-communications Prestige 128L Manual de usuario Pagina 72