Zyxel-communications Prestige 2602R Series Manual de usuario Pagina 235

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 450
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 234
Prestige 2602R Series User’s Guide
Chapter 22 Menu 2 WAN Backup Setup 235
CHAPTER 22
Menu 2 WAN Backup Setup
This chapter describes how to configure traffic redirect and dial-backup using menu 2 and 2.1.
22.1 Introduction to WAN Backup Setup
This chapter explains how to configure the Prestige for traffic redirect connections.
22.2 Configuring WAN Backup in Menu 2
From the main menu, enter 2 to open menu 2.
Figure 117 Menu 2 WAN Backup Setup
The following table describes the fields in this menu.
Menu 2 - Wan Backup Setup
Check Mechanism = DSL Link
Check WAN IP Address1 = 0.0.0.0
Check WAN IP Address2 = 0.0.0.0
Check WAN IP Address3 = 0.0.0.0
KeepAlive Fail Tolerance = 0
Recovery Interval(sec) = 0
ICMP Timeout(sec) = 0
Traffic Redirect = No
Press ENTER to Confirm or ESC to Cancel:
Table 78 Menu 2 WAN Backup Setup
FIELD DESCRIPTION
Check Mechanism Press [SPACE BAR] and then press [ENTER] to select the method that the
Prestige uses to check the DSL connection.
Select DSL Link to have the Prestige check the DSL connection’s physical
layer. Select ICMP to have the Prestige periodically ping the IP addresses
configured in the Check WAN IP Address fields.
Check WAN IP
Address1-3
Configure this field to test your Prestige's WAN accessibility. Type the IP
address of a reliable nearby computer (for example, your ISP's DNS server
address). When using a WAN backup connection, the Prestige periodically
pings the addresses configured here and uses the other WAN backup
connection (if configured) if there is no response.
Vista de pagina 234
1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 449 450

Comentarios a estos manuales

Sin comentarios