ZyXEL Communications IES-1248-51 Guía de usuario descargar pdf (Pagina 29)

IES-1248-51V Support Notes

2. Prestige 660R-61 Settings

We configure Prestige 660R-61 as bridge mode. The default VPI/VCI of

IES-1248-51V is 0/33. So we need to set up such values. Prestige 660R-61

has a Telnet server inside. We need to configure it via Telnet.

2.1 Menu1: General Setup

Go to Menu 1. In this menu, we must set “Rout IP = NO” and “Bridge = YES”.

2.2 Menu4: Internet Access Setup

The encapsulation must be RFC 1483 for bridge mode. The Multiplexing should be

the same as IES-1248-51V. The LLC-based is default mode of IES-1248-51V.

Additionally, we must check if the VPI/VCI is the same as IES-1248-51V. The default

VPI/VCI of IES1248-51V is 0/33.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 89 90

Sin comentarios

ZyXEL Communications IES-1248-51 Guía de usuario Pagina 29