ZyXEL Communications G-3000 Guía de usuario Pagina 116

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 288
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 115
G-3000H User’s Guide
116 Chapter 9 VLAN
5 Type a VLAN Group ID. This should be the same as the management VLAN ID on the
ZyAIR.
6 Enable Tx Tagging on the port which you want to connect to the ZyAIR. Disable Tx
Tagging on the port you are using to connect to your computer.
7 Under Control, select Fixed to set the port as a member of the VLAN.
Figure 56 VLAN-Aware Switch - Static VLAN
8 Click Apply. The following screen displays.
Figure 57 VLAN-Aware Switch
9 Click VLAN Status to display the following screen.
Figure 58 VLAN-Aware Switch - VLAN Status
Follow the instructions in the Quick Start Guide to set up your ZyAIR for configuration. The
ZyAIR should be connected to the VLAN-aware switch. In the above example, the switch is
using port 1 to connect to your computer and port 2 to connect to the ZyAIR: see Figure 55.
1 In the ZyAIR web configurator click VLAN under ADVANCED to open the VLAN
setup screen.
2 Select the Enable VLAN Tagging check box and type a Management VLAN ID (10 in
this example) in the field provided.
Vista de pagina 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 287 288

Comentarios a estos manuales

Sin comentarios