ZyXEL Communications G-3000 Guía de usuario descargar pdf (Pagina 19)

ZyAIR G-3000 Quick Start Guide

PROBLEM CORRECTIVE ACTION

The SYS LED is

off.

Unplug the power adaptor and plug it in again. If the error persists, you may have a

hardware problem. In this case, you should contact your vendor.

I cannot ping any

computer on the

wireless LAN.

If the ETHN LED is off, check the cables between the ZyAIR and your computer or

hub.

Verify that the IP address and the subnet mask of the ZyAIR and the computers are

in the same range.

1 2 ... 14 15 16 17 18 19

Sin comentarios

ZyXEL Communications G-3000 Guía de usuario Pagina 19