ZyXEL Communications P-2900-4HB Guía de usuario descargar pdf (Pagina 42)

Chapter 4 Tutorials

P-2900-4HB User’s Guide

This tutorial uses the following example settings:

Note: You have to apply for a public IP address if you need one and configure it as a

static IP address on the Web Configurator.

4.3.1 Network Setup and IP Settings

Use this section to set up the network and configure the IP settings on servers A

and B. This section also shows how to enable DHCP for LAN computers IP

assignments.

1 This tutorial assumes your ZyXEL Device has successfully connected to the cable

network. You should see the ONLINE LED is on from the ZyXEL Device’s front

panel.

2 Configure the IP addresses on A and B (see Table 7). Connect them to the ZyXEL

Device’s LAN. Turn on the Web and FTP services on A and B respectively.

Table 7 IP Settings in this Tutorial

DEVICE / COMPUTER IP ADDRESS

Static IP 1 1.1.1.1/24

Static IP 2 2.2.2.1/24

Static IP 3 3.3.3.1/24

LAN IPs Management IP: 192.168.1.1/24

DHCP Type: Server

DHCP IP Range: 192.168.1.33~192.168.1.64

A’s IP 1.1.1.5/24 (IP-1), gateway: 1.1.1.1

B’s IP 2.2.2.5/24 (IP-2), gateway: 2.2.2.1

NAT On, Many-to-One

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 125 126

Sin comentarios

ZyXEL Communications P-2900-4HB Guía de usuario Pagina 42