ZyXEL Communications P8701T Guía de usuario descargar pdf (Pagina 12)

BASIC OPERATIONS ON THE ROUTER

3-2

Version 1.0

3.2 CONFIGURING THE ROUTER

If you are going to connect only one PC to your router, a monouser configuration would be

enough. In that case, it is recommended to install a firewall and an antivirus software

updated and enabled in your PC due to it will be directly connected to the internet. On the

other side, if you expected to connect different devices to your router, you must select the

multiuser configuration. It is recommended to use a multiuser configuration even though

when you´re going to connect only one PC to the internet, due to the fact that it provides

higher security and makes it possible to enjoy all the advanced features supported by the

router.

Additionally to the monouser or multiuser configuration, you must also configure the IP

address assignment mode for the VDSL2 router. There are two possibilities about this IP

address assignment configuration for a broad band line.

•

Static address assignment: a fixed IP address is assigned to the router for all

connections.

•

Dynamic address assignment: the IP address assigned is not always the same, the values

provided are the PPPoE session username and password to be used to get the

connection.

This information appears in the welcome note received by the user at home. They can also be

obtained dialing to the phone number 900502010 from the phone line where the broad band

line is installed .

NOTE: In all next explanations it is considered that the starting point is the

factory default settings. If it were necessary, please refer to the VDSL2 router

User’s Guide to check how to restore factory default settings.

3.2.1 MULTIUSER CONFIGURATIONS

In both network address assignments, dynamic (factory default value in the router) and static,

some configuration options are common. Initially, it is necessary to configure the router

private network (LAN). Select: Advanced Setup ->LAN to display next screen where you

will need to fill in the according values:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Sin comentarios

ZyXEL Communications P8701T Guía de usuario Pagina 12