ZyXEL Communications Parental Control Gateway HS100/HS100W Guía de usuario Pagina 119

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 357
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 118
HomeSafe User’s Guide
8-2 WAN
Table 8-1 WAN : Route
LABEL DESCRIPTION
WAN
Traffic
Redirect
The default WAN connection is "1' as your broadband connection via the WAN port
should always be your preferred method of accessing the WAN. The default priority of
the routes is WAN and then Traffic Redirect.
Apply
Click Apply to save your changes back to the HomeSafe.
Reset
Click Reset to begin configuring this screen afresh.
8.4 Configuring WAN ISP
To change your HomeSafe’s WAN ISP settings, click WAN, then the WAN ISP tab. The screen
differs by the encapsulation.
8.4.1 Ethernet Encapsulation
The screen shown next is for Ethernet encapsulation.
Figure 8-2 WAN ISP : Ethernet Encapsulation
The following table describes the labels in this screen.
Table 8-2 WAN ISP : Ethernet Encapsulation
LABEL DESCRIPTION
Encapsulation You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Service Type
Choose from Standard, Telstra (RoadRunner Telstra authentication method), RR-
Manager (Roadrunner Manager authentication method), RR-Toshiba (Roadrunner
Toshiba authentication method) or Telia Login.
The following fields do not appear with the Standard service type.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the user name above.
Retype to Confirm Type the password again to make sure that you have entered it correctly.
Login Server IP
Address
Type the authentication server IP address here if your ISP gave you one.
Vista de pagina 118
1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 356 357

Comentarios a estos manuales

Sin comentarios