
© ZyXEL Communication Corp. Page 13 of 49
Proprietary & Confidential Information
2. SNMP browser can connect to SNMP of DUT
3. DUT reboot
4. The SNMP can't connect after DUT reboot
5. You need disable and enable the SNMP of DUT again
5. [TR069] If prefix not change, without send WAN_CONNECTION_UP event to smd.
6. [TR069] When the connReqPath is NULL,tr69 will crash.
7. [Interface Group] If there are multiple WANs, one is default WAN, the other WAN is
bounded with an interface group at br1, br1 is dynamic interface group with critiria of
opt60. When default WAN is in bridged mode, and interface grouped WAN is routing
mode, interface group is failed to bind its LAN PC.
8. [CLI] Cannot add an ETHWAN interface from command line.
9. [SNMP][SPRID# 140603049] The WanIP of SNMP get value=0 on PPPoE WAN.
Condition: 1. DUT was PPPoE WAN
2. The WanIP(OID 1.3.6.1.4.1.890.1.2.2.3) of SNMP get value=0
3. The IPoE WAN didn't have this issue
10. [SNMP][SPRID# 140603051] The LoginPasswd of SNMP can't set value lower than 6
characters
Condition: 1. DUT was PPPoE WAN
2. The LoginPasswd(OID 1.3.6.1.4.1.890.1.2.2.6) of SNMP can set value=
123456 successfully
3. The LoginPasswd(OID 1.3.6.1.4.1.890.1.2.2.6) of SNMP can't set value=
12345 successfully
11. [SNMP][SPRID# ] The PPPoEusername and PPPoEpasswd of SNMP can't set value on
PPPoE WAN
Condition: 1. DUT was PPPoE WAN
2. The PPPoEusername(OID 1.3.6.1.4.1.890.1.2.2.4) and PPPoEpasswd(OID
1.3.6.1.4.1.890.1.2.2.5) of SNMP can't set value on PPPoE WAN
12. [Wireless] MAC Filter doesn't work on WLAN clients with "WPA-PSK" and
"WPA2-PSK" security mode.
Symptom:
1. Enable MAC Filter, click Allow and add the MAC address of the WLAN clients.
2. When wireless security mode configures as "WPA-PSK" or "WPA2-PSK", WLAN
clients can’t associate with DUT.
13. [GUI][SPVD# 94] Need to change the name of original "More AP" to "Guest/More AP".
14. [MAC Filter][SPVD#63] When "Host name" set special characters of MAC Filter rule,
the rule will show error result.
Comentarios a estos manuales