ZyXEL Communications ZYWALL 70 - V4.04 Guía de usuario descargar pdf (Pagina 80)

(5) Unplug wireless card and reboot device.

(6) PC connects to DMZ port, IP is 10.10.2.100/24 and gateway is 10.10.2.1, and the

PC ping 10.10.2.1 will fail.

13. [BUG FIX]

Symptom: The eWC>Firewall>Default Rule page will popup JavaScript error in

router mode.

Condition:

(1) Go to eWC>FIREWALL>Default Rule page.

(2) Click Reset button, ZyWALL pop-ups a JavaScript error.

14. [BUG FIX]

Symptom: Unknown crash.

Condition:

(1) Restore default romfile.

(2) Switch device to Active/Active mode, and confirm WAN1 and WAN2 can work

fine.

(3) Set WAN2 ping check point to User-defined.

(4) After a while, the device sometimes will crash.

15. [BUG FIX]

Symptom: IDP Total Sessions Scanned is wrong.

Condition:

(1) Enable AV, SMTP service and enable all directions.

(2) Enable IDP, but disable all traffic direction.

(3) Attacker sends the mail containing virus to victim via ZyWALL to check if

Anti-Virus can detect viruses.

(4) In eWC>REPORTS>THREAT REPORTS, Total Sessions Scanned of IDP will

count number. But it should not.

16. [BUG FIX]

Symptom: ZyWALL crashes if you try to backup Configuration AV or IDP.

Condition:

(1) Go to eWC>Security>ANTI-VIRUS(or IDP)>Backup & Restore page.

(2) Click Backup or Restore button.

(3) System will crash sometimes.

17. [BUG FIX]

Symptom: The ZyWALL should use user configured time server to do daily time

adjustment.

Condition:

(1) Reboot the ZyWALL, set 'abc.abc.edu' as user defined 'Time Server Address'.

(2) The time synchronization will fail at start-up and use the default built-in time

server list.

(3) The ZyWALL will always use one of built-in time servers to adjust time daily,

but the ZyWALL should use user configured time server to do daily time

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 111 112

Sin comentarios

ZyXEL Communications ZYWALL 70 - V4.04 Guía de usuario Pagina 80