ZyXEL Communications 1 Guía de usuario descargar pdf (Pagina 105)

9-8 Remote Node Setup

Table 9-4 Remote Node Network Layer Options Menu Fields

FIELD DESCRIPTION EXAMPLE

IP Address

Assignment

If your ISP did not assign you an explicit IP address, select

Dynamic; otherwise select Static and enter the IP address & subnet

mask in the following fields.

Dynamic

Rem IP

Address

If you have a Static IP Assignment, enter the IP address assigned to

you by your ISP.

Rem IP

Subnet

Mask

If you have a Static IP Assignment, enter the subnet mask assigned

to you.

Gateway IP

Addr

This field is applicable to Ethernet encapsulation only. Enter the

gateway IP address assigned to you if you are using a static IP

address.

My WAN

Addr

If you have a Static IP Assignment, enter the gateway IP address

assigned to you.

My WAN

Addr

This field is applicable to PPPoE and PPTP encapsulations only.

Some implementations, especially the UNIX derivatives, require the

WAN link to have a separate IP network number from the LAN and

each end must have a unique address within the WAN network

number. If this is the case, enter the IP address assigned to the

WAN port of your Prestige.

Note that this is the address assigned to your local Prestige, not the

remote router.

Network

Address

Translation

Use the [SPACE BAR] to select either Full Feature, None or SUA

Only. See the NAT chapter for a full discussion of this feature.

SUA Only

Metric This field is valid only for PPTP/PPPoE encapsulation. The metric

represents the “cost” of transmission for routing purposes. RIP

routing uses hop count as the measurement of cost, with a minimum

of 1 for directly connected networks. Enter a number that

approximates the cost for this link. The number need not be precise,

but it must be between 1 and 15. In practice, 2 or 3 is usually a good

number.

Private This field is valid only for PPTP/PPPoE encapsulation. This

parameter determines if the Prestige will include the route to this

remote node in its RIP broadcasts. If set to Yes, this route is kept

private and not included in RIP broadcast. If No, the route to this

remote node will be

ated to other hosts throu

h RIP

Yes

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 284 285

Comentarios a estos manuales

Vikicmj 04 Jan 2024 | 10:44:24

urenrjrjkvnm

Evalyw 07 Jan 2024 | 13:35:47

Med

Viktorimky 13 Jan 2024 | 22:28:53

Cinema

ZyXEL Communications 1 Guía de usuario Pagina 105

Comentarios a estos manuales

Relacionado con productos y manuales para Routers ZyXEL Communications 1