ZyXEL Communications NWD-210N - FOR MAC V1.00 Guía de usuario descargar pdf (Pagina 109)

Chapter 14 NAT

NBG5715 User’s Guide

109

14.4 The NAT Advance Screen

To change your NBG5715’s trigger port settings, click Network > NAT > NAT Advance. The

screen appears as shown.

Note: Only one LAN computer can use a trigger port (range) at a time.

Figure 65 Network > NAT > NAT Advance

The following table describes the labels in this screen.

Table 47 Network > NAT > NAT Advance

LABEL DESCRIPTION

Port Triggering Rules

# This is the rule index number (read-only).

Name Type a unique name (up to 15 characters) for identification purposes. All

characters are permitted - including spaces.

Incoming Incoming is a port (or a range of ports) that a server on the WAN uses when it

sends out a particular service. The NBG5715 forwards the traffic with this port

(or range of ports) to the client computer on the LAN that requested the service.

Port Type a port number or the starting port number in a range of port numbers.

End Port Type a port number or the ending port number in a range of port numbers.

Trigger The trigger port is a port (or a range of ports) that causes (or triggers) the

NBG5715 to record the IP address of the LAN computer that sent the traffic to a

server on the WAN.

Port Type a port number or the starting port number in a range of port numbers.

End Port Type a port number or the ending port number in a range of port numbers.

Apply Click Apply to save your changes back to the NBG5715.

Reset Click Reset to begin configuring this screen afresh.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 291 292

Sin comentarios

ZyXEL Communications NWD-210N - FOR MAC V1.00 Guía de usuario Pagina 109