Zyxel-communications P-660W-Tx v2 Manual de usuario Pagina 1

Copyright © 2008. All rights reserved.P-660W-Tx v2ADSL Router over POTS/ISDNQuick Start GuideVersion 3.40 03/2008Edition 1DEFAULT LOGINIP Address http

P-660W-Tx v2 Quick Start Guide92 Click Wireless.3 Select Enable Wireless LAN.4 ESSID: Type the name (up to 32 characters) you want to give to your wir

P-660W-Tx v2 Quick Start Guide102 Select the ESSID name you gave the P-660W-Tx v2 and click Connect. (The ESSID used here is an example.)3 If you have

P-660W-Tx v2 Quick Start Guide1OverviewThe P-660W-Tx v2 lets you:• Set up a wireless network with IEEE 802.1b and IEEE 802.1g capability • Set up a

P-660W-Tx v2 Quick Start Guide21 Set Up Your Hardware 1 Antenna: Point the antenna upwards (perpendicular to the ground).2DSL: Connect the P-660W-Tx v

P-660W-Tx v2 Quick Start Guide3Look at the LEDs (lights)The DSL light blinks and then stays on when a DSL connection is detected. The ETHERNET light t

P-660W-Tx v2 Quick Start Guide42.2 Set up Internet Access with the Connection Wizard If Zero Configuration does not detect your Internet access settin

P-660W-Tx v2 Quick Start Guide52.2.2 Configure Internet Access and Local Network Settings with the Connection WizardUse the Connection Wizard to set u

P-660W-Tx v2 Quick Start Guide63 Check your WAN and LAN settings in the screen that appears. Click Save Settings. Go to step 9 of this section. Routin

P-660W-Tx v2 Quick Start Guide75 Check your WAN and LAN settings in the screen that appears. Click Change LAN Configuration to configure the P-660W-Tx

P-660W-Tx v2 Quick Start Guide89 The P-660W-Tx v2 automatically tests the connection to the computer(s) connected to the LAN port. To test the connect