ZyXEL Communications VMG5313-B30A Guía de usuario descargar pdf (Pagina 38)

100

101

Chapter 4 Tutorials

VMG1312-B Series User’s Guide

4.3.2 Using WPS

This section shows you how to set up a wireless network using WPS. It uses the Device as the AP

and ZyXEL NWD210N as the wireless client which connects to the notebook.

Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter

or PCMCIA card).

There are two WPS methods to set up the wireless client settings:

• Push Button Configuration (PBC) - simply press a button. This is the easier of the two

methods.

• PIN Configuration - configure a Personal Identification Number (PIN) on the Device. A wireless

client must also use the same PIN in order to download the wireless network settings from the

Device.

Push Button Configuration (PBC)

1 Make sure that your Device is turned on and your notebook is within the cover range of the wireless

signal.

2 Make sure that you have installed the wireless client driver and utility in your notebook.

3 In the wireless client utility, go to the WPS setting page. Enable WPS and press the WPS button

(Start or WPS button).

4 Push and hold the WPS button located on the Device’s front panel for more than 5 seconds.

Alternatively, you may log into Device’s web configurator and go to the Network Setting >

Wireless > WPS screen. Enable the WPS function and click Apply. Then click the Connect button.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 375 376

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications VMG5313-B30A Guía de usuario Pagina 38

Comentarios a estos manuales

Relacionado con productos y manuales para Routers ZyXEL Communications VMG5313-B30A