ZyXEL Communications VMG8924-B30A Series Guía de usuario descargar pdf (Pagina 110)

Chapter 7 Home Networking

VMG8924-B10A and VMG8924-B30A Series User’s Guide

110

3 Click Apply to save your settings.

Figure 55 Network Setting > Home Networking > LAN Setup

The following table describes the fields in this screen.

Table 30 Network Setting > Home Networking > LAN Setup

LABEL DESCRIPTION

Interface Group

Group Name Select the interface group name for which you want to configure LAN settings. See Chapter

12 on page 179 for how to create a new interface group.

LAN IP Setup

IPv4 Address Enter the LAN IPv4 IP address you want to assign to your Device in dotted decimal notation,

for example, 192.168.1.1 (factory default).

Subnet Mask/

Prefix Length

Type the subnet mask of your network in dotted decimal notation, for example

255.255.255.0 (factory default). Your Device automatically computes the subnet mask

based on the IP Address you enter, so do not change this field unless you are instructed to

do so.

IGMP Snooping

Status Select the Enable IGMP Snooping checkbox to allows the Device to passively learn

multicast group.

IGMP Mode Select Standard Mode to have the Device forward multicast packets to a port that joins the

multicast group and broadcast unknown multicast packets from the WAN to all LAN ports.

Select Blocking Mode to have the Device block all unknown multicast packets from the

WAN.

DHCP Server State

DHCP Select Enable to have the Device act as a DHCP server or DHCP relay agent.

Select Disable to stop the DHCP server on the Device.

Select DHCP Relay to have the Device forward DHCP request to the DHCP server.

DHCP Relay

Server Address

This field is only available when you select DHCP Relay in the DHCP field.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 411 412

Sin comentarios

ZyXEL Communications VMG8924-B30A Series Guía de usuario Pagina 110