ZyXEL Communications G-570U Guía de usuario descargar pdf (Pagina 88)

ZyXEL G-570U User’s Guide

88 Chapter 6 Wireless Screens

The following table describes the labels in this screen.

6.16.1.2 Wireless Client

Start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the

same Setup Key as your AP’s and click Save.

Figure 54 Example Wireless Client OTIST Screen

6.16.1.3 G-570U in Wireless Client Mode

If you are using the G-570U in Wireless Client mode, you can enable OTIST using either the

OTIST button or the web configurator.

Table 23 OTIST

LABEL DESCRIPTION

OTIST Settings

Setup Key Enter the setup key of up to eight printable characters. The default OTIST setup

key is "01234567".

Note: If you change the OTIST setup key here, you must also make

the same change on the wireless client(s).

Yes! To have OTIST automatically generate a WPA-PSK key, select this check box. If

you manually configured a WEP key or a WPA-PSK key and you also select this

check box, then the key you manually configured is used.

Note: This option is not available in Wireless Client mode.

Start Click Start to encrypt the wireless security data using the setup key and have the

device set the wireless client to use the same wireless settings as the device. You

must also activate and start OTIST on the wireless client at the same time.

The process takes three minutes to complete.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 161 162

Sin comentarios

ZyXEL Communications G-570U Guía de usuario Pagina 88