ZyXEL Communications ZyWALL USG 2000 Manual de usuario descargar pdf (Pagina 25)

ZyXEL – ZyWALL USG Support Notes

Step 4. Click CONFIGURATION > Network > Firewall to open the firewall

configuration screen.

Here assume the user already assigned the WAN interface to WAN zone and

LAN interface to LAN1 zone.

Step 5. Click the Add button to create a firewall rule to enable the FTP service

to pass from WAN to LAN1.

Step 6. User can create an address object for the internal FTP server for

further configuration usage. Click Create new Object for this function.

Step 5. Click Rule Summary to customize the setup. The default is to drop all

packets.

Step 6. Configure the firewall rule to enable the FTP service to pass from

WAN1 to LAN.

- Source IP address is not specific

- Destination IP address is the FTP server’s address

- Select FTP service (with port 20/21) to be enabled

- Select the Permit action for matched packets

After this configuration, user can access the FTP server from WAN side.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 87 88

Sin comentarios

ZyXEL Communications ZyWALL USG 2000 Manual de usuario Pagina 25