ZyXEL Communications ZyWALL USG 2000 Manual de usuario Pagina 57

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 56
ZyXEL ZyWALL USG Support Notes
All contents copyright (c) 2010 ZyXEL Communications Corporation.
57
Step 2. Go to Configuration > App Patrol > General, enable Application Patrol,
enable BWM and enable Highest Bandwidth Priority for SIP Traffic.
Enabling Highest Bandwidth Priority for SIP Traffic forces the device to give SIP
traffic the highest bandwidth priority. When this option is enabled the system
ignores the bandwidth management settings of all application patrol rules for SIP
traffic and does not record SIP traffic bandwidth usage statistics.
NOTE: You need to register IDP/App Patrol license to use App Patrol.
Step 2. Go to Advanced > BW Management > Summary.
Enable WAN1 interface. Since ISP upload speed is 1 Mbps, set WAN1
speed to 1000 kbps.
Choose Priority-Based Scheduler.
Enable LAN interface. Since ISP download speed is 2 Mbps, set LAN speed
to 2000 kbps.
Step3. Go to Advanced > BW Management > Class Setup.
Add Sub-Class under interface WAN1 to manage upload traffic.
Vista de pagina 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 87 88

Comentarios a estos manuales

Sin comentarios