Zyxel-communications 2R-P1C Manual de usuario descargar pdf (Pagina 26)

P-2301/2R-P1C / P-2301RL-P1C User’s Guide

The ZyXEL Device automatically restarts. When the POWER

light stops blinking and stays on, follow the directions in

section 4 on page 64.1 to log in to the web configurator again.

However, use the Management IP Address you set up in step

3, instead of http://192.168.1.1. If your computer’s IP address

is in a different subnet, follow the directions in Setting Up Your

Computer’s IP Address on page 31 to change your computer’s

IP address.

5 Making Phone Calls

Use the following sections to make outgoing calls (from a

phone attached to the ZyXEL Device, to another phone) and

incoming calls (from another phone, to a phone connected to

the ZyXEL Device).

5.1 Making Outgoing Calls

Follow these directions to make calls over the Internet.

• If you want to dial a SIP number that only uses numbers (for

example, “12345”), dial the number on your phone’s keypad.

You can also set up a speed-dial entry, if you want, in the

Phone Book > Speed Dial screen.

• If you want to dial a SIP number that uses letters or if you

want to make a peer-to-peer call, set up a speed-dial entry

first. Use the Phone Book > Speed Dial screen. Then, dial

the speed-dial number to make the call.

• If you want to call a PSTN phone over the Internet, follow

your VoIP provider’s instructions.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 52 53

Sin comentarios

Zyxel-communications 2R-P1C Manual de usuario Pagina 26