Zyxel-communications 5 Series Manual de usuario descargar pdf (Pagina 214)

100

101

ZyWALL 5/35/70 Series User’s Guide

214 Chapter 10 Wireless LAN

10.16.6 IEEE 802.1x + No WEP

Click the NETWORK > WIRELESS CARD to display the Wireless Card screen. Select

802.1x + No WEP from the Security list.

Figure 100 NETWORK > WIRELESS CARD: 802.1x + No WEP

Idle Timeout

(Seconds)

The ZyWALL automatically disconnects a wireless station from the wireless network

after a period of inactivity. The wireless station needs to send the username and

password again before it can use the wireless network again. Some wireless clients

may prompt users for a username and password; other clients may use saved login

credentials. In either case, there is usually a short delay while the wireless client logs

in to the wireless network again.

This value is usually smaller when the wireless network is keeping track of how

much time each wireless station is connected to the wireless network (for example,

using an authentication server). If the wireless network is not keeping track of this

information, you can usually set this value higher to reduce the number of delays

caused by logging in again.

Authentication

Databases

Click Local User to go to the Local User Database screen where you can view and/

or edit the list of users and passwords. Click RADIUS to go to the RADIUS screen

where you can configure the ZyWALL to check an external RADIUS server.

Apply Click Apply to save your changes back to the ZyWALL.

Reset Click Reset to begin configuring this screen afresh.

Table 60 NETWORK > WIRELESS CARD: 802.1x + Static WEP (continued)

LABEL DESCRIPTION

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 834 835

Comentarios a estos manuales

Sin comentarios

Zyxel-communications 5 Series Manual de usuario Pagina 214

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications 5 Series