Zyxel-communications 70 Series Manual de usuario Pagina 537

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 807
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 536
ZyWALL 5/35/70 Series User’s Guide
537 Chapter 37 DMZ Setup
37.3.1 IP Address
From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).
Figure 291 Menu 5: DMZ Setup
From menu 5, select the submenu option 2. TCP/IP and DHCP Setup and press [ENTER].
The screen now displays
Menu 5.2 - TCP/IP and DHCP Ethernet Setup, as shown next.
Figure 292 Menu 5.2: TCP/IP and DHCP Ethernet Setup
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to
Section
35.4 on page 527 for information on how to configure these fields.
Note: DMZ, WLAN and LAN IP addresses must be on separate subnets. You must
also configure NAT for the DMZ port (see
Chapter 42 on page 562) in menus
15.1 and 15.2.
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 5.2 - TCP/IP and DHCP Ethernet Setup
DHCP= None TCP/IP Setup:
Client IP Pool:
Starting Address= N/A IP Address= 10.10.2.1
Size of Client IP Pool= N/A IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= N/A
Multicast= IGMP-v2
Edit IP Alias= No
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Vista de pagina 536
1 2 ... 532 533 534 535 536 537 538 539 540 541 542 ... 806 807

Comentarios a estos manuales

Sin comentarios