Zyxel-communications Broadband Security Gateway P-312 Manual de usuario Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 254
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
P312 Broadband Security Gateway
Remote Node Setup 4-5
Figure 4-3 Remote Node Profile for PPTP Encapsulation
The next table shows how to configure fields in Menu 11.1 not previously discussed above.
Table 4-3 Fields in Menu 11.1 (PPTP Encapsulation)
Field Description Examples
Encapsulation Toggle the space bar to choose PPTP. You must also go to
Menu 11.3 to check the IP Address setting once you have
selected the encapsulation method.
PPTP
IP Addr(ess)
Enter the IP address of the WAN Ethernet port.
10.0.0.140
Server IP
Addr(ess)
Enter the IP address of the ANT modem.
10.0.0.138
Connection
ID/Name
Enter the connection ID or connection name in the ANT. It
must follow the “c:id” and “n:name” format.
This field is optional and depends on the requirements of your
xDSL Modem.
N:My ISP
Schedules
You can apply up to four schedule sets here. For more details
please refer to the Call Schedule Setup chapter.
Nailed-Up
Connection
This field specifies if you want to make the connection to this
remote node a nailed-up connection.
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Encapsulation= PPTP Edit IP= No
Service Type= Standard Telco Option:
Service Name=N/A Allocated Budget(min)= 0
Outgoing= Period(hr)= 0
My Login= Schedules=
My Password= ******** Nailed-up Connections=
Authen= CHAP/PAP
Session Options:
PPTP : Edit Filter Sets= No
IP Addr= Idle Timeout(sec)= 100
Server IP Addr=
Connection ID/Name=
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 253 254

Comentarios a estos manuales

Sin comentarios