Zyxel-communications G.SHDSL.bis Router P-791R v2 Manual de usuario descargar pdf (Pagina 3)

P-791R v2 Quick Start Guide

Look at the LEDs

•The POWER LED blinks green while your P-791R v2 starts up and stays on when it is

ready.

•The DSL LED blinks while the P-791R v2 is trying to establish a connection with the ISP

and stays on when the connection is established.

•The ETHERNET LED stays on if the ETHERNET port is properly connected and blinks

when there is traffic.

V If any of these LEDs are off, check your connections, and inspect your

cables for damage. If the LEDs are still off, contact your local vendor.

2 Status Page

Use the status screen to view basic setup information.

1 Open your Internet browser, and enter

http://192.168.1.1.

V If you cannot access the web configurator, make sure you allow pop-up

windows and JavaScripts and set up Java permissions appropriately. See

the User’s Guide for more information and further troubleshooting tips.

V Make sure your computer’s IP address is in the same subnet as the P-791R

v2’s LAN IP address.

1 2 3 4 5 6 7 8

Sin comentarios

Zyxel-communications G.SHDSL.bis Router P-791R v2 Manual de usuario Pagina 3