Zyxel-communications ISDN Terminal Adapter Omni.Net Lite Manual de usuario descargar pdf (Pagina 64)

Omni.Net Lite User’s Guide

63 Chapter 3 Using AT Commands

Figure 20 AT Command Example 2

3.4.3 Setting Ports Priority

To set the same priority for both ports, enter AT\P2=0 and press [ENTER].

To set the PHONE 1 port to have the first priority, enter AT\P2=1 and press [ENTER].

To set the PHONE 2 port to have the first priority, enter AT\P2=2 and press [ENTER].

3.4.4 Disabling Call Waiting

A call waiting tone will interfere with data communication. It is highly recommended that you

disable the call waiting feature on the port to which a fax or modem is connected.

To disable call waiting on either port, enter AT!1A1=0 or AT!2A1=0 and press [ENTER].

3.4.5 Link Authentication

Refer to Section 2.5.1 on page 32 for more information.

Table 17 PPP AT commands

AT COMMANDS DESCRIPTION

AT%M1=0 Disable PAP to CHAP conversion (default).

AT%M1=1 Enable PAP to CHAP conversion.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Sin comentarios

Zyxel-communications ISDN Terminal Adapter Omni.Net Lite Manual de usuario Pagina 64