Zyxel-communications ISDN Terminal Adapter Omni.Net Lite Manual de usuario descargar pdf (Pagina 71)

Omni.Net Lite User’s Guide

Chapter 4 Using Tone Commands 70

4.3 Configuring Example with Tone Commands

This section shows you some examples of configuring the TA using Tone commands. Refer to

Chapter 2 on page 24 for more information about these TA features.

4.3.1 Phone Number Assignment

Use the ***310*<phone number>[*<sub-address>]# tone command to assign a phone

number to the PHONE port to which the telephone is attached. For example, dial

***130*5009001# to assign 5009001 to the analog port.

221*n# !pP1 Set outgoing call screen mode for the analog port.

n=0: No restriction (default).

n=1: Prohibit all outgoing calls.

n=2: Only accept the calls with the prefix in the pre-defined

list (see 35d*<prefix digits>#).

n=3: Only reject the calls with the prefix in the pre-defined

list (see 35d*<prefix digits>#).

222*n# !pP2 Select CLIP (Calling Line Identification Presentation) or

CLIR (Calling Line Identification Restriction) for the analog

port.

n=0 indicates you select CLIR and the ISDN switch will not

pass your phone number to the destination site.

n=1 indicates you select CLIP and the ISDN switch will pass

your phone number to the destination site.

310*<phone number>

[*<sub-address>]#

!pS Assign your phone number to the analog port.

<phone number>: Enter up to 32 characters, including digits

from 0 to 9, *, #, hyphen ( -), comma (,) and (‘,’). [‘,’] will be

ignored.

<sub-address>: Enter up to 20 ASCII characters ranging

from “0-9”,” a-z” and “A-Z”.

32d*<phone number>

[*<sub-address>]#

!pId Create a list of the incoming call phone number via the

analog port.

d=0-4: phone number index.

<phone number>: Enter up to 32 characters, including digits

from 0 to 9, *, #, hyphen ( -), comma (,) and (‘,’). [‘,’] will be

ignored.

<sub-address>: Enter up to 20 ASCII characters ranging

from “0-9”,” a-z” and “A-Z”.

35d*<prefix digits> # !pOd Create a list of the outgoing call prefix digits via the analog

port.

d=0-2

Table 22 Tone Commands

TONE COMMAND AT COMMAND DESCRIPTION

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 83 84

Comentarios a estos manuales

Sin comentarios

Zyxel-communications ISDN Terminal Adapter Omni.Net Lite Manual de usuario Pagina 71

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications ISDN Terminal Adapter Omni.Net Lite