Zyxel-communications Omni TA128 Manual de usuario Pagina 90
- Pagina / 173
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
78
• Service Indicator - Determines what kind of bearer services
are desired.
• Destination Address - Provides information for the telephone
company to direct the call to the remote party.
Control of Outgoing Service Indicator
The Outgoing Service Indicator will be assigned when you
configure the B channel protocols using the command ATBnn.
Since there are a number of combinations of voice or voice-band-
data services on the analog adapters, users may want to control the
outgoing Service Indicator themselves for some specific
applications.
Use the following table to configure S104/S107 (Service Indicator)
and S108/S111 (Additional Information Octet) according to the
terminal types:
Service Indicator
S107: analog, Phone 1
S104: analog, Phone 2
Addi. S. I.
S111: analog, Phone 1
S108: analog, Phone 2
Telephone
1 (Fernsprechen) 1 (3.1 KHz)
Modem
2 (analog - dienste) 3 (Daten Über Modem)
or
4 (Btx Über Modem)
G3 Fax
3 (analog - dienste) 2 (Fax Gruppe 3)
Control of ENDGERÄTEAUSWAHLZIFFER (EAZ)
EAZ (or Terminal Selection Code) is the last digit of an ISDN
phone number in 1TR6. Usually EAZ=0 indicates a global call. Any
terminal on the S0 interface which is service-compatible with the
incoming call, can answer the call.
Other values of EAZ (1,2,....,9) provide the possibility for assigning
multiple ISDN numbers to a single ISDN BRI line. A calling user
- Omni TA128 1
- User’s Manual 1
- ZyXEL Limited Warranty 2
- FCC Part 15 Information 3
- Contacting ZyXEL 5
- Table of Contents 7
- 1 Introduction 13
- Key Features of the TA128 14
- Technical Specifications 15
- Physical Characteristics 15
- Unpacking Your TA128 16
- 2 Installing your TA128 17
- U Interface Model 20
- Power On and Self Diagnostics 21
- TA128 Front Panel 22
- Front Panel Switch 23
- 3 Configuring Your ISDN 25
- AT<Enter> 26
- ATI<Enter> 26
- ATI1<Enter> 27
- 4 ISDN Communication 29
- Supported AT command types: 30
- Outgoing Calls 31
- ATS83.7=1<enter> 32
- ATS83.7=0 <enter> 32
- ATDA17146930762<enter> 32
- ATDB17146930762<enter> 32
- Incoming Calls 33
- Digital Data 34
- Determining the Packet Length 34
- Answering a Call using MSN 35
- Data over Speech Channel 36
- Best-effort call answering 37
- 5 Setup for Windows 95 39
- Networking 43
- CAPI Installation 47
- 6 Point-to-Point Protocol 49
- Feature list 50
- Authentication conversion 51
- Multilink PPP 52
- Call bumping 53
- Bandwidth On Demand (BOD) 54
- BACP/BAP 54
- 7 V.110 and Synchronous 57
- Making V.110 Calls 58
- Synchronous Connections 58
- V.25bis Command Set 59
- DTR Drop-Dialing Operation 60
- 8 V.120 ISDN 63
- Configuring the V.120 mode 64
- Answering incoming calls 65
- Speeds of 128Kbps 66
- 9 X.75 ISDN 71
- Answering an X.75 call 72
- Making an X.75 Call 72
- 10 Handling Analog Calls 77
- Accepting an Incoming Call 79
- Feature Phone 81
- InterCom 82
- Call Waiting 82
- Placing a second call 82
- Receiving a second call 82
- Call Broker 83
- Call Reject 83
- Call Transfer 84
- Three-way Conference Call 84
- 11 Advanced ISDN Call 86
- AT&ZOx=s. The 88
- Answering a Call 92
- Answering a Call for 1TR6 93
- Best-effort Call Answering 94
- Data Call Indication 95
- Placing a Call 96
- Placing a call for DSS1 97
- Leased Line ISDN 98
- 12 Security Functions 100
- Level 1 security 101
- Level 2 security 101
- Level 3 security 101
- AT*HCn=xxxx, - n=0,1,..,4 104
- 13 Upgrading Your TA128 106
- Kernel Mode 107
- 14 DTE Port 2 108
- Configuring DTE Port 2 109
- Setting of DTE port 2 Speed 114
- DTE Port 2 Call Control 115
- 15 Diagnostics 116
- The Diagnostic Command (ATCG) 118
- Resetting The TA128 119
- Capturing the Protocol Data 120
- Analyzing the Captured Data 121
- 16 AT Command Set 124
- AT Command Descriptions 125
- Description of ATI3 Output: 133
- 17 Status Registers and 142
- Setting S-registers 143
- S-Register Descriptions 145
- ATS35.7=1<enter> 167
- 18 Phone Jack Pinout 168
- 4. Not Connected 169
- 19 Serial Port Interface 170
- 65-020-128006 173
- ZyXELZyXEL Communications Co 173
Relacionado con productos y manuales para Hardware Zyxel-communications Omni TA128
(11 paginas)
(137 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.085 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales