Zyxel-communications Omni TA128 Manual de usuario descargar pdf (Pagina 91)

can select, via the public network, one or more distinct terminals on

a single BRI line.

With its highly integrated, multi-function features, the TA128 can

be viewed as a “black box” containing multiple distinct terminals.

Each of these "internal terminals" can be assigned one EAZ using

the command AT&ZIn=m, where n=0-7 and m= 0-9.

Command Function

&ZI0=m assigns EAZ for X.75.

&ZI1=m assigns EAZ for V.110.

&ZI2=m assigns EAZ for V.120.

&ZI3=m assigns EAZ for PPP, MPPP.

&ZI4=m assigns EAZ for ISDN data, protocol auto-

detection.

&ZI5=m assigns EAZ for PPP, MPPP.

&ZI6=m assigns EAZ for Phone 2.

&ZI7=m assigns EAZ for Phone 1.

The default EAZ of each protocol is as follows:

• &ZI0=1 - for Data.

• &ZI4=2 - for Data.

• &ZI6=3 - for the analog adapter, Phone 2.

• &ZI7=4 - for the analog adapter, Phone 1.

AT&ZI? can be used to display the EAZ numbers assigned by the

AT&ZIn=m commands.

The EAZ (last digit) of the destination address in an incoming

SETUP message will be checked with each protocol's EAZ. If there

is a match and the service indicated is compatible with this

protocol, the call will be accepted using the protocol.

OO NOTE: EAZs must be assigned in exact order.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 172 173

Sin comentarios

Zyxel-communications Omni TA128 Manual de usuario Pagina 91