Zyxel-communications P-2602R-DxA Series Manual de usuario Pagina 115

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 348
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 114
P-2602R/RL-DxA Series User’s Guide
Chapter 9 Network Address Translation (NAT) Screens 115
9.4.3 Configuring Servers Behind Port Forwarding (Example)
Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the
example), port 80 to another (B in the example) and assign a default server IP address of
192.168.1.35 to a third (C in the example). You assign the LAN IP addresses and the ISP
assigns the WAN IP address. The NAT network appears as a single host on the Internet.
Figure 54 Multiple Servers Behind NAT Example
9.5 Configuring Port Forwarding
Note: If you do not assign a Default Server IP address, the ZyXEL Device discards
all packets received for ports that are not specified here or in the remote
management setup.
Click Network > NAT > Port Forwarding to open the following screen.
See Table 50 on page 152 for port numbers commonly used for particular services.
Figure 55 Port Forwarding
Vista de pagina 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 347 348

Comentarios a estos manuales

Sin comentarios