Zyxel-communications P-2602R-DxA Series Manual de usuario Pagina 175

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 348
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 174
P-2602R/RL-DxA Series User’s Guide
Chapter 13 Firewall Configuration 175
Figure 86 Firewall Example: Rules: MyService
13.8 DoS Thresholds
For DoS attacks, the ZyXEL Device uses thresholds to determine when to drop sessions that
do not become fully established. These thresholds apply globally to all sessions.
You can use the default threshold values, or you can change them to values more suitable to
your security requirements.
Refer to Section 13.8.3 on page 177 to configure thresholds.
13.8.1 Threshold Values
Tune these parameters when something is not working and after you have checked the firewall
counters. These default values should work fine for most small offices. Factors influencing
choices for threshold values are:
The maximum number of opened sessions.
The minimum capacity of server backlog in your LAN network.
The CPU power of servers in your LAN network.
Network bandwidth.
Type of traffic for certain servers.
If your network is slower than average for any of these factors (especially if you have servers
that are slow or handle many tasks and are often busy), then the default values should be
reduced.
Vista de pagina 174
1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 347 348

Comentarios a estos manuales

Sin comentarios