Zyxel-communications P-2608HWL-Dx Series Manual de usuario descargar pdf (Pagina 296)

P-2608HWL-Dx Series User’s Guide

296 Chapter 23 Remote Management Configuration

The following table describes the labels in this screen.

23.4 Telnet

You can configure your ZyXEL Device for remote Telnet access as shown next. The

administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.

Table 115 Remote Management: WWW

LABEL DESCRIPTION

WWW

Port You may change the server port number for a service if needed, however you must

use the same port number in order to use that service for remote management.

Access Status Select the interface(s) through which a computer may access the ZyXEL Device

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the

ZyXEL Device using this service.

Select All to allow any computer to access the ZyXEL Device using this service.

Choose Selected to just allow the computer with the IP address that you specify to

access the ZyXEL Device using this service.

HTTPS

Server Host Key Select the certificate that the ZyXEL Device will use to identify itself. The ZyXEL

Device is the SSL server and must always authenticate itself to the SSL client (the

computer which requests the HTTPS connection with the ZyXEL Device).

Authenticate

Client Certificates

Select Authenticate Client Certificates (optional) to require the SSL client to

authenticate itself to the ZyXEL Device by sending the ZyXEL Device a certificate.

To do that the SSL client must have a CA-signed certificate from a CA that has

been imported as a trusted CA on the ZyXEL Device (see Appendix E on page 389

on importing certificates for details).

Port The HTTPS proxy server listens on port 443 by default. If you change the HTTPS

proxy server port to a different number on the ZyXEL Device, for example 8443,

then you must notify people who need to access the ZyXEL Device web

configurator to use “https://ZyXEL Device IP Address:8443” as the URL.

Access Status Select a ZyXEL Device interface from Access Status on which incoming HTTPS

access is allowed.

You can allow only secure web configurator access by setting the WWW Access

Status field to Disable and setting the HTTPS Access Status field to an

interface(s).

Secure Client IP A secure client is a “trusted” computer that is allowed to communicate with the

ZyXEL Device using this service.

Select All to allow any computer to access the ZyXEL Device using this service.

Choose Selected to just allow the computer with the IP address that you specify to

access the ZyXEL Device using this service.

Apply Click Apply to save your settings back to the ZyXEL Device.

Cancel Click Cancel to begin configuring this screen afresh.

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 450 451

Comentarios a estos manuales

Sin comentarios

Zyxel-communications P-2608HWL-Dx Series Manual de usuario Pagina 296

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications P-2608HWL-Dx Series